| |
Garg Advantages Over forty years experience in PTFE insulated wires and cables field Supplier for many critical applications requiring high reliability 100% physical and electrical testing for conformance to applicable MIL and ASTM standards Controlled tight tolerance on weight, PTFE density and conductor resistance Proprietary TWS (Tape wrap sintered) material is free of pinholes and offers the highest uniformity and concentricity TWS overcomes disadvantages of extruded PTFE in fine gauge, thin wall types Surface as good as extruded insulation without its disadvantages - Well Equipped lab for measurement of resistance, capacitance, impedance, attenuation, spark test and dielectric test
|
|
| |
Advantages of PTFE as insulation Material
- Inert to practically all chemicals even at elevated temperatures.
- Excellent thermal stability suitable for use from -200°C to +260°C.
- Suitable for very wide frequency range (DC to above 10,000 MHz) over wide temperature range.
- Lowest dielectric constant (2.1) and lowest dissipation factor (below 0.0003)
- Highest volume and surface resistance (in Terra-ohms)
- Corona Resistance is fair (CR PTFE is available for severe corona conditions).
- Smaller size, lighter weight and much higher reliability.
- 100% Physical and Electrical testing.
- Surface as good as extruded wire without the disadvantages of extruded PTFE insulation in fine-gauge thin-wall types.
|
|
